The following guide for POS setup.

Please download the setup file at http://cloud.bizspoketech.com:8088/index.php/s/HJqlq2XVueYRzgD

Receipt Printer Driver Installation

We will use EPSON printer as example below.
Step 1) Run the APD_607R1_T88VII_WM_e.exe. It is the wizard for EPSON printer driver

• If setting up for Epson TM-T88VII, go to the link to download the driver at https://epson.com/Support/Point-of-Sale/Thermal-Printers/Epson-TM-T88VII-Series/s/SPT_C31CJ57052?review-filter=Windows+8+64-bit#panel-drivers--12 (Select "Advanced Printer Driver")

Step 2) Setup the driver installation as following:

• Printer example:
  

Model: TM-T88V

Connected type: USB (if connected via USB)

• 
  
  • Select setup manually
• 
• Manufacturer: select EPSON, then select TM-T88V (the model)
  • 
• 

Step 3) The wizard program will download the suitable driver automatically.
Step 4) After the installation, the Windows can recognize the EPSON receipt printer from System Setting > Printers and Scanners.

(example only)

Hardware Station

Hardware Station (HW Station) acts as a bridge between BC and peripherals (e.g. receipt printer, cash drawer, and etc.)

Step 1) Please go to http://cloud.bizspoketech.com:8088/index.php/s/HJqlq2XVueYRzgD download setup files. (if not downloaded yet)

Step 2) Extract the "LS Central 23.zip". There are three files inside the zip file. Click w1_ls_central_23-0-0-0.exe to run for LS Hardware Station installation.


Step 3) Use the default configuration. Then click Next.


Step 4) Go to "C:\LSRetail\setup\", then run "Hardware Station.exe".

Step 5) Accept the agreement

Step 6) Configure as following:

- Enable "Start service after installation"

- "Select startup type of..." = Automatic 

- Enable "Install CCO"

Step 7) Go to http://localhost:8088/ to add hardware peripherals, e.g. receipt printer, cash drawer, and card machine.

5) Add Printer:

1. Select "Create Windows Printer"
2. Select driver (dedicate driver is needed for the model, i.e. the select the printer)
3. Create device

6) Then you can perform test print on the receipt printer.

Remember to enable "Load VirtualStation" at "Server Config" to use virtual station to print receipt

Receipt will be shown at Receipt Station in Virtual Station after a test print.

Mapping to Hardware Profile

In BC, go to "POS Hardware Profile List".

Create a new Hardware Profile, using the store POS 01 / 02 to distinguish them.

Let use the "VIRTUAL" hardware profile as the example. Before mapping the printer/virtual printer to BC, we test the hardware connection from "Test Hardware Connection".

If connection successful, we can proceed the following steps.

Click "Sync Hardware Profile" in edit mode (Click the "Pen" button on top for edit mode)

Then all virtual devices (and receipt printer if have) are detected. Remove the virtual devices on the lists if you are mapping to a physical receipt printer, cash drawer, and etc.

Go to "POS Terminal List". Then click the POS terminal you would like to set (e.g. MKA001)

In the POS Terminal, assign the newly created hardware profile to the field "Hardware Profile". (i.e. the hardware profile set previously)

Go to the POS (Run POS), then print X-Report (X銷售總表). The report should be shown on VirtualStation (or printed on a receipt if you mapped a physical printer)

LS AppShell Setup

LS AppShell allows user to use the POS in full screen mode.

1) Go to Microsoft Store then search “LS Central AppShell” then install.

2) Open LS AppShell. Then click three-dots button > Edit at AppShell to map Lush POS interface at Settings.

3) Click gear icon to edit the URL

4) Set the parameters as followings:

• Host: https://businesscentral.dynamics.com/
• Tenant: 351dd86e-3c5e-414e-98dc-57b7d04f14f7
• Environment Name: sandbox0910
• Company: Logos_0915_Test

• Page: 99008880

  Remark

  You may open the Business Central on the browser. Check the URL to find the environment name and company.

  

  

• 

5) Empty Login Settings for Windows user login

6) Scroll down and click “Run Web Client”. The POS interface appears.

• If no account logged in in LS AppShell, Microsoft login portal will ask you to keep login session or not.
• The Microsoft login portal requests to change password when login with a brand-new account.