The smart scanner we used for demonstration is supporting 4G and WiFi networks.
|
---|
Stock take |
---|
is to manually |
---|
check and count the actual |
---|
quantity of goods, in order to align the quantity with the system inventory. The |
---|
differences may be occurred if:
|
---|
|
---|
|
---|
etc. Stock take can be done for |
---|
all or specified part of the inventory, or |
---|
separated into different inventory batches at the do stock take in the same time. |
---|
Step |
---|
Create |
inventory batch |
1) |
Select "Stock Take" in the menu and click "Create" to open a new Stock Take batch | ||
2) Enter "Description" and " |
Stock Take Date" |
3) In "Add |
Line", filter the newly added |
ranks for inventory in different situations |
在「新增行列」, 在不同情況篩選新增行列作盤點
- 若只針對某些貨品, 在貨品欄選取該貨品
- 若只針對某貨倉/貨架, 在「貨倉/貨品」欄選位置
- 若全部盤點, 兩欄可漏空
預設將所有庫存在正確位置
若果不選此項, 便會預設「實際貨量」是0, 這樣所有行必須填清楚實貨數。否則, 選取了即代表預設已點貨數是系統倉存數, 在不修改的情況下當完成正確。這選項適用於要求員工全部必點
選好之後, 按「計算」, 系統將會根據要求加行並自動儲存
重複以上步驟, 可在同一盤點批次新增其他貨品/貨倉
Preset all inventory in the correct position. After selecting, click "Calculate", the system will add lines as required and automatically save Repeat the above steps to add other goods/warehouses in the same inventory batch | ||
Android version handheld scanner | IOS version handheld scanner | |
Fill in the actual count (in the scanner) 1) Open m-In in the handheld scanner, and select "Stock take" in the left menu | ||
2) If you use scanner to count item, you can start scanning Please take note for stock take screen, each row represents different its lot/serial number, you must pick the correct row for stock take | ||
3) After finishing, click "Save'' to save the stock take result, the inventory will not be adjusted immediately | ||
Post Invetory adjustments 1) Select "stock take" in the web browser m-In, and select the relevant Stock Take batch, click "Stock Take" button on the top right corner | ||
2) Check the quantity of each stock take row Estimated Qty: The quantity recorded in system | ||
3) Click "Post" to confirm the difference of amount and implement adjustments |
將實際盤點數填上(在掃瞄器)
1) 在手提掃𣈴器打開m-In, 在左邊選單選「盤點」
點按要處理的盤點批次, 進入盤點批次版面
2) 若果使用掃瞄器點貨, 可以開始掃瞄
若是人手點貨, 點按相關盤點行, 在數字鍵盤輸入數量
要注意在盤點畫面, 每行代表不同批次/序號, 要點選正確行才能盤點
3) 完成後, 按「儲存」, 便可將數據儲存, 倉存不會立即調整
將倉存調整過帳
1)在選單選擇「盤點」, 選擇相關盤點批次
2) 檢查清楚每行的貨數
預計貨量: 在制作盤點批次是的系統貨數
實際貨量: 已於網頁/手提掃瞄器點算的貨數
量差: 預計貨量減去實際貨量, 此為貨數之差別, 當按下「記帳」時, 系統將會以此數字調整系統貨數:
- 正數: 會以量差作正調整
- 負數: 會以量差作負調整